5/16 By 1 1/2 Concrete Anchor 50112 By Itw
-
5/16 By 1 1/2 Concrete Anchor 50112 By Itw
Fasteners Red Head, 5/16 inch x 11/2 inch Hex Sleeve Concrete Anchor. $0.79
Buy Now »
Similar Products
|
Fasteners Masonry sleeve anchors hex head red head dia. X lgth. 5/16 inch x 11/2 For fastening applications in concrete, hollow block, grout filled block and brick. Contractor grade anchors. Anchor diameter equals hole diameter. Applications: Machinery and supports, window frames, partitions, cabinets and shelves, duct straps, pipe support.
|
|
Building Materials J rod slab anchors double head wet set black width x height ins. = 5/8 x 12 Designed to be installed into concrete slab at the time the concrete is poured. Concrete must be a 2500 PSI minimum slab. Concrete slab must allow 4725 lb. of vertical tension on anchor without lifting. This assumes that the concrete weighs 150 lb. per cubic foot. Slab must be 8 inch minimum thickness at location under any anchor to allow 5 inch embedment of anchor J rod. Black color.
|
|
Building Materials Concrete slab anchors with expansion bolt patio mobile home black wdth. X lgth. 5/8 inch x 3 Designed to be bolted to an expansion sleeve in an existing concrete slab or footing with only a 5/8 inch drilled hole for expansion anchor bolt. Concrete must be 2500 PSI minimum slab with 4 inch minimum thickness and 6/6 x 10/10 wire mesh or fiber mesh installed. Concrete slab must allow 4725 lb. of vertical tension on anchor without lifting. This assumes that the concrete weighs 150 lb. per cubic foot. Minimum distance from the anchor shaft to one edge of the slab is 4 inch from one edge and 6 inch from any other edge. Black color.
|
|
Fasteners Red Head, 1/2 inch x 3 inch Hex Sleeve Concrete Anchor.
|
* Must be complete