G90 Tension Bridging Ltb20 By Simpson Strong Tie
-
G90 Tension Bridging Ltb20 By Simpson Strong Tie
Building Materials G90, tension bridging, upc: 0 44315 47890 1 $0.50
Buy Now »
Similar Products
|
Building Materials G90 tension bridging, upc: 0 44315 58540 1
|
|
Building Materials 22 gauge spans 2 joists per unit, typically used for bridging or bracing ijoists. Must be installed before subfloor sheathing to reduce joist movement and subsequent floor noise. G90 galvanizing finish. Requires 8d x 11/2 nails.
|
|
Building Materials Joist bridging overunder galvanized steel prong wdth x lgth 1 inches x 44 Spans three joists in under/over installation; prong teeth in the center helps reduce nailing. G90 galvanizing finish; bridging should be installed on floor joists with a nominal depthtothickness ratio of 5 to 6 or more (2055 National Design Specification for Wood Construction; Section 4.4.1). Install prior to subfloor sheathing; use (2) 8d x 11/2 inch nails at each end. Fully seat nails to avoid any movement against the bridging and subsequent floor noise. Meets ESR178, L.A. City RR 25843 and FL13285 codes. 18 Gauge.
|
|
Fasteners 10DHDG, LB, 10D HDG Nails, StrongTie Nails and Structural Fasteners Have Been Developed As The Optimum Fasteners For Connector Products, Specifically Designed To Compliment Simpson Strong Tie Connectors, Hot Dip Galvanized For Extra Corrosion Resistance, 10D, 0.148 x 3 inch Smooth Shank, Box.
|
* Must be complete