Plumbing Hvac
|
Plumbing Hvac Pvc fittings extended socket coupling slip x slip for schedule 40 pipe size 1 inches Used to join lengths of pipe. Conforms to ASTM D2466.
|
|
Plumbing Hvac Pvc fitting 90 degree female elbow slip x fip. For schedule 40 pipe. Size 1/2 inch Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
Plumbing Hvac Pvc fittings tee all slip for schedule 40 pipe upc individually bagged size 3/4 inches Used to provide a branch supply line from a main line. Conforms to ASTM D2466.
|
|
Plumbing Hvac Pvcdwv fittings coupling hub x hub schedule 40 size 11/2 inches Used in drainwastevent applications to join straight lengths of pipe.
|
|
Plumbing Hvac Ptfe thread seal tape blue spool bulk 1/2 inch x 260 inches Made of white virgin Teflon, 0.4 density, 0.003 inch thick. Over 50 percent elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates 400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Nontoxic and nonflammable. Meets Federal Specification T27730A.
|
|
Plumbing Hvac Pvc fittings threaded coupling fip x fip for schedule 40 pipe size 1/2 inches Used for joining sections of threaded pipe and nipples. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
Plumbing Hvac 1/2 inch , Galvanized Steel Pipe Strap.
|
|
Plumbing Hvac Pvc fittings female tee slip x slip x fip for schedule 40 pipe size 1/2 inches Solvent welds into main line to provide a threaded branch line of the same size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Bulk.
|
|
Plumbing Hvac Pvc fittings reducing tee all slip schedule 40 size 3/4 inches x 3/4 x 1/2 Used to provide a branch supply line from a main line. Reduces to smaller pipe size. Conforms to ASTM D2466.
|
|
Plumbing Hvac Galvanized pipe nipples standard size 1/2 inches Right hand threads.
|
|
Plumbing Hvac Copper fittings 90 degree elbow close rough c x c wrot i.D. 1/2 inches x 1/2
|
|
Plumbing Hvac Pvc fittings female adapter slip x fip for schedule 40 pipe upc individually bagged size 1 inches Adapts pressure pipe to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
Plumbing Hvac Pvc fittings 90 degree female elbow slip x fip for schedule 40 pipe size 3/4 inches Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
Plumbing Hvac Test caps inset solvent weld size 3 inches Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
|
|
Plumbing Hvac Pvc fittings reducing bushing spigot x slip schedule 40 size 1 inches x 1/2 Inserts into fitting hub to reduce to smaller pipe size. Conforms to ASTM D2466.
|
|
Plumbing Hvac Tubing straps utype double hole copper contractor pack bagged nom. 3/8 inch Contractor Pack Bagged
|
|
Plumbing Hvac 11/2 inch , ABS/DWV Coupling, Hub x Hub, Used To Join 2 Lengths Of Pipe Of The Same Size, For NonPressure Drain, Waste and Vent Installation, Low Chemical Resistance, Black Material.
|
|
Plumbing Hvac 3/4 inch Nylon Insert Coupling, Poly x Poly.
|
|
Plumbing Hvac 3/4 inch , Galvanized Steel Pipe Strap.
|
|
Plumbing Hvac 1/8 inch Black Plug, Made In USA.
|
|
Plumbing Hvac Plain forged. For use with water and steam. Rated to 300 psi at 150 degrees fahrenheit. Rated to 150 psi for steam. Class 150 standard fitting meets the following specifications: material: ansi/astm a197. Dimensions:
|
|
Plumbing Hvac Plain forged. For use with water and steam. Rated to 300 psi at 150 degrees fahrenheit. Rated to 150 psi for steam. Class 150 standard fitting meets the following specifications: material: ansi/astm a197. Dimensions:
|
|
Plumbing Hvac Slip joint washers pvc size 11/2 inches x 11/2
|
|
Plumbing Hvac Pex fittings crimp ring qickclamp nom. Size ins. =3/8 Stainless steel (Type 304) mechanical fastener, self positioning, bridge creates 360 degreewatertight seal, can be used with Zurn brass or poly fittings.
|
|
Plumbing Hvac Pvc fittings reducing bushing spigot x fip for schedule 40 pipe size 1 inches x 3/4 Inserts into fitting hub to reduce standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
Plumbing Hvac Black pipe nipples standard size 1/2 inches Right hand threads.
|
|
Plumbing Hvac Black pipe nipples standard size 1/2 inches x 11/2 Right hand threads.
|
|
Plumbing Hvac Copper fittings coupling with dimp stop c x c wrot dimple stop i.D. 3/8 inches
|
|
Plumbing Hvac Pvc fittings male adapter slip x mip for schedule 40 pipe upc individually bagged size 1 inches Adapts pressure pipe to standard female pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.
|
|
Plumbing Hvac Pvc fittings 90 degree elbow slip x slip for schedule 40 pipe upc individually bagged size 1 inches Used to change direction in piping. Conforms to ASTM D2466.
|
